sheet metal worker wanted

mikelapta



Joined: 20/11/2008
Posts: 2186

Message Posted:
08/01/2010 09:52

just a small job.

need a metal shelf made,about 50mm square,and with 90Deg lip on 2 sides.any suggestions please

Mike

keithcaley



Joined: 13/06/2008
Posts: 2521

Message Posted:
08/01/2010 10:07

Mike,

At the risk of appearing sarcastic (and I can assure you that I don't have a sarcastic bone in my body...MUCH!),

perhaps you might want to consider a slightly larger shelf - unless you only want to stand a pepper pot on it

Anyway, I always ise the chap down Merit hotel road, his office is now above the little market on the corner, on the main road.

keithcaley



Joined: 13/06/2008
Posts: 2521

Message Posted:
08/01/2010 11:08

Just found his card, after a lot of searching...

The firm is called Arman Metal, and his name is Ökten (pronounced 'airkten' or 'erkten' with a scouse accent )

Mobile is 0542 855 0928

mikelapta



Joined: 20/11/2008
Posts: 2186

Message Posted:
08/01/2010 11:25

Thanks Keith,will draw and take to him.

Basically it is to hide heat protective stone around my new wood-burning oven stove.

and deflect some heat downwards.

Shall I use my scouse accent to talk to him,yous knows what I mean like?

Mike

keithcaley



Joined: 13/06/2008
Posts: 2521

Message Posted:
08/01/2010 11:36

Mike - only if it involves the letter Ö ...

BTW, I still think that you might consider revising the size of your shelf - 50mm (2 inches) square is a bit on the small side

proger1



Joined: 18/04/2009
Posts: 2919

Message Posted:
08/01/2010 11:42

It could be a very small stove !!!